Home > > > Report Detail

Analysis of Site Selection for Engineering Plastics Production in China Edition (1)

Publisher Name :
Date: 10-May-2016
No. of pages: 134

Through selecting specific regions in China and giving detailed analysis of them, this report draws an overall picture of the industrial development and market factors of engineering plastics (EP) and its compounds in the country, trying to provide a guide and reference for decision-making on choosing a suitable location for establishing a factory or new production line in China.

EP & compounds are widely used in manufacturing of automobile and electronic & electrical products in China. Driven by the growth of these two downstream industries, development of EP & compounds has also becoming prosperous. Right now, both domestic and abroad companies have set foot in this market. Having established factories in different China regions, their industrial layout is quite complete already.

Supported by an ever increasing demand from downstream industries, China's EP & compounds market is maintaining its progress. It would be an opportunity for both existing manufacturers and new comers. Major manufacturers are planning to or have begun to enlarge their market share through capacity expansion. To better fit in this competition, there's a lot for market players to think about before simply deciding to launch an investment.

To help making such decisions, this report selects four regions in China's key economic zones as target regions for figuring out which place would be an optimized choice to launch production of EP & compounds and thus get a foothold in the China market as soon as possible. They are Guangdong Province, Zhejiang Province, Chongqing and Tianjin respectively representing the Pearly River Delta Economic Zone, the Changjiang River Delta Economic Zone, the Circum-Bohai Sea Economic Zone and the Southwest China Economic Zone. Based on the 3C (customer, cost and competitor) Model, this report demonstrates detailed comparison of these four regions in varied aspects that are concerned with investment.

Key points of this report are listed as follow.


  • General economic status of the selected four economic zones

  • Comparison of the selected four regions in terms of policy, cost, market potential (development of downstream products, chiefly auto and electronic & electrical products)

  • Introduction to major manufacturers of EP & compounds in China, both domestic and multinational ones

  • Trend of industrial transfer within China and from China to abroad and impact on the location selection

  • Overview of major industrial zones in the ultimately selected region


Note:


  • Guangdong (Economic center and plastic production center in the Pearl River Delta)

  • Zhejiang (Important economic center and industrial production center in the Changjiang River Delta)

  • Chongqing (Economic center and plastic production center in Southwest China)

  • Tianjin (Plastic production center in Circum-bohai Sea Region)

Analysis of Site Selection for Engineering Plastics Production in China Edition (1)

Table of Contents

Executive summary
Methodology

1 Overview
1.1 Regional economies in China & potential regions for new production site
1.2 Economy of four selected regions
1.2.1 Guangdong Province
1.2.2 Zhejiang Province
1.2.3 Chongqing
1.2.4 Tianjin

2 Comparison of selected four regions
2.1 Policy factors
2.1.1 Government's development plan for engineering plastics and compounds
2.1.2 Foreign investment encouraging policy
2.1.3 Summary of policy comparison
2.2 Cost-related factors
2.2.1 Raw material supply
2.2.2 Transportation
2.2.3 Labor condition
2.2.4 Land pricing
2.2.5 Summary of cost comparison
2.3 Market potential factors
2.3.1 Auto market
2.3.2 Unmanned aerial vehicle market
2.3.3 Electronic & electrical market
2.3.4 Distribution of downstream market
2.3.5 Summary of market potential comparison

3 Major manufacturers of engineering plastics and compounds in China
3.1 Distribution of manufacturers
3.2 Introduction to key domestic manufacturers
3.3 Characteristics of manufacturers

4 Trend of industrial transfer within China and from China to abroad
4.1 Future market trend under macro environment of industrial transfer—From China to Southeast Asia
4.2 Future market trend under macro environment of industrial transfer—From East China to West China
4.3 Comparison of international transfer and national transfer

5 Conclusion

6 Appendix (Industrial zones in Guangdong Province)
6.1 Overview of Guangdong Province
6.2 Guangzhou City
6.3 Foshan City
6.4 Dongguan City
6.5 Huizhou City
6.6 Zhongshan City

List of Tables

Table 2.2.1-1 Major Chinese producers' capacity of polybutylene terephthalate, 2013
Table 2.2.1-2 Multinational producers' capacity of polycarbonate in China, 2014
Table 2.2.1-3 Major multinational and Chinese producers' capacity of polyamide in China, 2014
Table 2.2.3-1 Minimum monthly wage in Guangdong Province, Zhejiang Province, Chongqing and Tianjin, 2015
Table 2.2.4-1 Lowest transfer cost of industrial land by grade in China, 2014
Table 2.2.4-2 Amount of districts under different grades of land transfer cost in Guangdong Province, Zhejiang Province, Chongqing and Tianjin
Table 2.2.5-1 Comparison of production cost of engineering plastics in Guangdong Province, Zhejiang Province, Chongqing and Tianjin, 2015
Table 2.3.4.2-1 Famous brands of electronics & electrical products in China
Table 2.3.4.5-1 Top 10 listed LED companies in China ranked by net profit, 2014
Table 2.3.5-1 Market share engineering plastic & compounds in auto and electronic & electrical industries by region in China, 2014
Table 3.1-1 Major multinational manufacturers of engineering plastics & compounds in China
Table 3.2.3-1 Guangdong Silver Age Sci. & Tech. Co., Ltd.'s output and sales volume of modified plastic, 2013-2014
Table 4.1-1 Growth rates of FDI inflow in different regions worldwide, 2010-2014
Table 4.2-1 Change of foreign direct investment's share in different regions of China, 2007 & 2012
Table 4.2-2 Share of foreign direct investment in electrical manufacturing industry in China's total by region, 2009 & 2014
Table 6.1-1 Top 10 cities in Guangdong Province by GDP ranking, 2014

List of Figures

Figure 1.2-1 GDP of Guangdong, Zhejiang, Chongqing and Tianjin, 2010-2014
Figure 1.2-2 GDP growth rates of Guangdong, Zhejiang, Chongqing and Tianjin, 2010-2014
Figure 1.2-3 Added value of secondary industry in of Guangdong, Zhejiang, Chongqing and Tianjin, 2010-2014
Figure 1.2.1-1 GDP structure of Guangdong Province, 2014
Figure 1.2.1-2 GDP and growth rate of Guangdong Province, 2010-2014
Figure 1.2.2-1 GDP structure of Zhejiang Province, 2014
Figure 1.2.2-2 GDP and growth rate of Zhejiang Province, 2010-2014
Figure 1.2.3-1 GDP structure of Chongqing, 2014
Figure 1.2.3-2 GDP and growth rate of Chongqing, 2010-2014
Figure 1.2.4-1 GDP structure of Tianjin, 2014
Figure 1.2.4-2 GDP and growth rate of Tianjin, 2010-2014
Figure 2.2.1-1 Output share of plastic in primary forms by region in China, 2013
Figure 2.2.3-1 Supply/demand ratio of skilled workers and common labor in China, Q2 2014 to Q1 2015
Figure 2.3.1.1-1 Auto output in China, 2010-2014
Figure 2.3.1.1-2 Annual growth rates of auto output in eastern China, southern China, Midwest China and northern China, 2011-2014
Figure 2.3.1.1-3 Share of auto output in China by region, 2014
Figure 2.3.1.2.1-1 China's output of new energy automobiles, 2010-2015 est.
Figure 2.3.1.2.1-2 Projected output of new energy automobiles in China, 2015-2020
Figure 2.3.1.2.1-3 Output share of of new energy automobiles in China by origin of brand, 2014
Figure 2.3.1.2.1-4 Chinese companies' shares of new energy automobiles by sales volume, 2014
Figure 2.3.1.2.2-1 Future prospects of Chinese new energy automobiles, 2014, 2015 & 2020
Figure 2.3.2-1 Forecast on global output of civil unmanned aerial vehicle, 2015-2020
Figure 2.3.3.1-1 Revenue of electrical manufacturing industry in China, 2010-2014
Figure 2.3.3.1-2 Share of electrical products' output in China by region, 2014
Figure 2.3.3.2-1 Output of television in China, 2010-2014
Figure 2.3.3.2-2 Share of television output in China by region, 2013
Figure 2.3.3.2-3 Annual growth rates of television output in eastern China, southern China, Midwest China and northern China, 2011-2013
Figure 2.3.3.3-1 Output of computer in China, 2010-2014
Figure 2.3.3.3-2 Share of computer output in China by region, 2014
Figure 2.3.3.3-3 Output of computer in eastern China, southern China, Midwest China and northern China, 2010-2014
Figure 2.3.3.3-4 Output of laptop in China, 2010-2014
Figure 2.3.3.3-5 Share of laptop output in China by region, 2014
Figure 2.3.3.4-1 Output of mobile phone in China, 2010-2014
Figure 2.3.3.4-2 Share of mobile phone output in China by region, 2014
Figure 2.3.3.4-3 Annual growth rates of mobile phone in eastern China, southern China, Midwest China and northern China, 2011-2014
Figure 2.3.3.5-1 Output of office automation devices in China, 2010-2014
Figure 2.3.3.5-2 Share of office automation devices' output in China by region, 2014
Figure 2.3.3.6-1 Output of microwave oven in China, 2010-2014
Figure 2.3.3.6-2 Share of microwave oven output in China by region, 2014
Figure 2.3.3.7-1 Output of air conditioner in China, 2010-2014
Figure 2.3.3.7-2 Share of air conditioner output in China by region, 2013
Figure 2.3.3.7-3 Annual growth rates of air conditioner output in eastern China, southern China, Midwest China and northern China, 2011-2013
Figure 2.3.3.8-1 Output of refrigerator in China, 2010-2014
Figure 2.3.3.8-2 Share of refrigerator output by region, 2014
Figure 2.3.3.8-3 Annual growth rates of refrigerator output in eastern China, southern China, Midwest China and northern China, 2011-2014
Figure 2.3.3.9-1 Output of washing machine in China, 2010-2013
Figure 2.3.3.9-2 Share of washing machine output in China by region, 2013
Figure 2.3.3.9-3 Annual growth rates of washing machine output in eastern China, southern China, Midwest China and northern China, 2011-2013
Figure 2.3.4.1-1 Distribution of major auto manufacturers in China
Figure 2.3.4.4-1 Manufacturing locations of major computer manufacturers in China
Figure 2.3.4.5-1 Share of LED output in China by region, Jan.-June 2015
Figure 3.1-1 Distribution of engineering plastics & compounds manufacturers in China
Figure 3.2.2-1 Shanghai Pret Composites Co., Ltd.'s revenue by region, 2014
Figure 3.2.3-1 Guangdong Silver Age Sci. & Tech. Co., Ltd.'s revenue by region, 2014
Figure 3.3-1 Capacity of engineering plastics & compounds in China by region, 2014, t/a
Figure 4.2-1 Share of foreign direct investment in electrical manufacturing industry in China's total, 2007-2013
Figure 5-1 3C Model (competitor, consumer and cost) on site selection for production of engineering plastics & compounds in China
Figure 6.1-1 Map of Guangdong Province
Figure 6.1-2 GDP of Guangzhou, Foshan, Dongguan, Huizhou and Zhongshan cities in Guangdong Province, 2010-2014
Figure 6.1-3 GDP growth rate of Guangzhou, Foshan, Dongguan, Huizhou and Zhongshan cities of Guangdong Province, 2010-2014
Figure 6.2.1-1 GDP structure of Guangzhou City, 2014
Figure 6.2.2.2-1 Industrial structure of Guangzhou Development District in Guangzhou City, 2014
Figure 6.2.2.3-1 Transportation of Guangdong Development District in Guangzhou City
Figure 6.2.3.2-1 Gross output value of industrial enterprises above designated size by industry in Nansha New District, 2014
Figure 6.3.1-1 GDP structure of Foshan City, 2014
Figure 6.3.2.2-1 GDP structure of Nanhai District, 2014
Figure 6.4.1-1 GDP structure of Dongguan City, 2014
Figure 6.4.2.2-1 GDP structure of Dalang Town, 2014
Figure 6.5.1-1 GDP structure of Huizhou City, 2014
Figure 6.5.2.2-1 GDP structure of Huicheng District, 2014
Figure 6.5.3.2-1 GDP structure of Huiyang District in Huizhou City, 2014
Figure 6.6.1-1 GDP structure of Zhongshan City, 2014
Figure 6.6.2.2-1 GDP structure of Nantou Town of Zhongshan City, 2013

  • Global Thermoplastic Filler Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 102
    The global Thermoplastic Filler market was valued at US$ 14620 million in 2023 and is anticipated to reach US$ 23030 million by 2030, witnessing a CAGR of 7.2% during The forecast period 2024-2030. North American market for Thermoplastic Filler is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Thermoplastic Filler is estimated to increase from $ million in 2023 to......
  • Global Thermally Conductive Plastic Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 99
    The global Thermally Conductive Plastic market was valued at US$ 8274 million in 2023 and is anticipated to reach US$ 18700 million by 2030, witnessing a CAGR of 14.3% during The forecast period 2024-2030. Thermal conductive plastics have a wide range of applications. In addition to traditional electronics, electrical, automotive, aerospace, industry, health care and other fields, they can also be used in emerging fields such as new energy and smart homes. With The continuous develo......
  • Global Extrusion Compounds Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 89
    The global Extrusion Compounds market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. North American market for Extrusion Compounds is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Extrusion Compounds is estimated to increase from $ million in 2023 to reach $ million b......
  • Global Plastic Pellet Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 90
    The global Plastic Pellet market was valued at US$ 1139 million in 2023 and is anticipated to reach US$ 1876.5 million by 2030, witnessing a CAGR of 6.2% during The forecast period 2024-2030. North American market for Plastic Pellet is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Plastic Pellet is estimated to increase from $ million in 2023 to reach $ million b......
  • Global Polysulphone (PSU) Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 90
    The global Polysulphone (PSU) market was valued at US$ 934.7 million in 2023 and is anticipated to reach US$ 1412 million by 2030, witnessing a CAGR of 6.1% during The forecast period 2024-2030. North American market for Polysulphone (PSU) is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Polysulphone (PSU) is estimated to increase from $ million in 2023 to reach ......
  • Global Reinforced Thermoplastic Pipes Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 98
    Reinforced thermoplastic pipes (RTP) is a generic term referring to a reliable high strength synthetic fibre (such as glass, aramid or carbon), which is a kind of high-pressure plastic compound pipe consisting of three layers. The outer layer can be white (on The ground against ultraviolet ray) or black (under The ground) based on needs; The intermediate layer is The reinforced tape compounded by The reinforced material, which may be polyester fiber or aramid fiber and so on. The pipes use many ......
  • Global High Density Microcellular Polyurethane Foam Market Research Report 2024
    Published: 08-Jan-2024        Price: US 2900 Onwards        Pages: 101
    High Density Microcellular Polyurethane Foam is a kind of polyurethane foam that has The characteristic of high density and low foam. It is relatively soft material, with a variety of surface mount and adaptability, with The shape better, with excellent resistance to compression and compression resilience, excellent shock absorbing properties. It's widely Used in mobile phones, hard drives, digital cameras, GPS, laptop, CD-ROM, monitors, PDA, speakers, computer housing seal, instrument panels, s......
  • Global Thermoplastic Polyamide Market Research Report 2024
    Published: 08-Jan-2024        Price: US 2900 Onwards        Pages: 92
    Thermoplastic polyamide elastomers are high-performance thermoplastic elastomer (TPE) block copolymers, based on nylon and polyethers or polyesters. PAEs consist of alternating hard and soft segments joined by amide linkages. They are used mainly in areas where other thermoplastic elastomers cannot compete or perform, especially at lower temperature. Moreover, PAEs can be processed by usual melt-processing techniques, such as injection molding, extrusion, blow molding, rotational molding and the......
  • Global Expanded Polypropylene Market Research Report 2024
    Published: 08-Jan-2024        Price: US 2900 Onwards        Pages: 90
    EPP is engineered polypropylene resin, formed into small, closed-cell foam beads. Expanded polypropylene (EPP) was developed in The 1980s. This is particle foam based on polypropylene. As opposed to EPS, EPP is not impregnated with a foaming agent, meaning that subsequent foaming agent-based expansion is not possible. The global Expanded Polypropylene market was valued at US$ 1719.8 million in 2023 and is anticipated to reach US$ 2889.1 million by 2030, witnessing a CAGR of 7.6% dur......
    • SERVICES
    Value for Money
    We believe in "optimum utilization of available budget and resources". While servicing our clients' (your) market research requirements, we keep the same approach in focus to help you get the best value for your $$s.
    Ever Growing Inventory
    Ranging from the smallest feasible / required data (datasheets, data facts, SWOT analysis, company profiles, etc) to full research reports that help you make decisions, our inventory is updated almost on a daily basis with the latest industry reports from domain experts that track more than 5000 niche sectors.
    One Stop Solution
    Need a custom research report on medical devices market? Require all available business intelligence on 3D printing industry? Exploring F&B sector of a particular country/region? RnRMarketResearch.com is your one-stop-solution to all market intelligence needs. We not only offer custom research and consulting services, we also "bundle" reports to meet your needs and help you fetch the data analysis you require for your business.
    Dedicated Client Engagement
    Not limited to only "finding" relevant reports for you, our client engagement team dedicates its efforts to understand your "business need" and accordingly maps available research data to help you move forward. Call "your" client engagement executive any time of your day and get your questions answered in order to make the correct business decision.
    Saving Time and Efforts
    Simply share your research requirement details with us and let us do all the hard work to find required intelligence for you. When you add up our "one stop solution" and "dedicated client engagement" services mentioned above, you obviously know the time and effort saving you do by working with us.
    Payment Flexibility
    Working with Fortune 500 organizations, we understand the importance of being flexible for payments. Share your payment terms with us and we will surely match up to them to ensure you get access to required business intelligence data without having to wait for the payment to be done.
    Post-Purchase Research Support
    Have questions after reading a report / datasheet bought through us? Not sure about the methodology used for data available in the research? Talk to us / Share your questions with us and if required, we will connect you with the analyst(s)/author(s) of the report(s) and ensure you get satisfactory answers for the same. Need more data / analysis / report(s) on the topic of your research/project? The RnRMarketResearch.com team is here for you 24X7 to support you with your post-purchase requirements. Subscription Offers & Packages (Get in touch with us for more details - [email protected] / +1 888 391 5441 )
    • Ad Hoc
    • Pay - as - you - go / Bucket Subscriptions
    • Fixed Cost for #of reports
    • Customize / Personalize as per your needs