Paint & Coatings Market Research Reports

"...... hensive presentation of the global market for Coil Coatings, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketpla......"

"...... a true solvent. The vehicle often may be water, alcohol, a petroleum distillate, or a finishing agent such as shellac, lacquer, varnish and polyurethane. Coloured or stained finishes do not typically deeply penetrate the pores of the wood and may la......"

"...... re used to provide a protective surface coating in much the same way as paints do" At the same time they allow the original surface to show but add a lustrous and glossy finish to it. This report aims to provide a comprehensive presentat......"

"...... s are typically applied with brushes, rollers or sprayers. The coatings in question are intended for on-site application and do not include "factory-applied coatings for building products such as vinyl siding or aluminum window frames [that] may ulti......"

"...... can either be applied to the interior wall or can be mixed with an additive on an existing paint. These paints are water based, and thus are non-toxic and environment friendly. They offer high thermal coefficient and low thermal conductivity prevent......"

"...... to coat products in various categories such as: agricultural equipment, appliances, automobiles, automotive parts, marine components, transformers, metal office furniture, lawn & garden equipment and furniture, fasteners, trim appliances, fixtures a......"

"...... report aims to provide a comprehensive presentation of the global market for Pipe Coating, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their po......"

"...... ed electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. LPI (LP Info......"

"...... ance or other surface characteristics. The thickness of the hard coat typically ranges from about 1µ to about 20µ depending on the polymer and the application technique. Today's hard coats and the substrates on which they are applied are becoming mor......"

"...... D-19. Technological innovation and advancement will further optimize the performance of the product, enabling it to acquire a wider range of applications in the downstream market. Moreover, customer preference analysis, market dynamics......"