Global Ball Joints and Parts Market Insights, Forecast to 2025

Publisher Name :
Date: 14-Jun-2019
No. of pages: 117
Inquire Before Buying

Ball joints are spherical bearings, which connect steering knuckles to control arm in an automotive.

Although, ball joints have long service life, loss of lubricant or contamination due to seal failure leads to suspension system and steering failure. This further leads to misalignment and handling, which has led manufacturers to develop efficient systems catering to the problem. One of the challenges faced by overall steering system manufacturers is introduction of premium line products as compared to economy products. Since, ball joints are expensive as compared to tie rods, the ball joints and parts market is expected to record considerable revenue growth in the near future. The revenue growth is mainly attributed to shipment growth of ball joints and parts across the globe. Imports of ball joints and parts in Asian countries is a challenge for existing as well as new players entering the ball joints and parts market. Moreover, the market is witnessing consolidation at distributor level, which is anticipated to lead to fluctuating prices. This is further expected to expedite growth of low-priced economy-line parts and thus, a significant change in total market share of premium brands.

Global Ball Joints and Parts market size will reach xx million US$ by 2025, from xx million US$ in 2018, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019-2025 as the forecast period to estimate the market size for Ball Joints and Parts.

This industry study presents the global Ball Joints and Parts market size, historical breakdown data (2014-2019) and forecast (2019-2025). The Ball Joints and Parts production, revenue and market share by manufacturers, key regions and type;

The consumption of Ball Joints and Parts in volume terms are also provided for major countries (or regions), and for each application and product at the global level. Market share, growth rate, and competitive factors are also evaluated for market leaders Johnson Controls Incorporated, Honeywell International Incorporated, etc.

The following manufacturers are covered in this report:

- Johnson Controls Incorporated

- Honeywell International Incorporated

- Goodyear Tire & Rubber Company

- General Motors Company

- Ford Motor Company

- LANBI

- CCTY Bearing Company

- Pailton Engineering

- ZF TRW

Ball Joints and Parts Breakdown Data by Type

- Ball Stud

- End Cover

- Bearings

- Belleville Washer

- Housing

Ball Joints and Parts Breakdown Data by Application

- Passenger Cars

- Commercial Vehicles

Ball Joints and Parts Production by Region

- United States

- Europe

- China

- Japan

- South Korea

- India

- Other Regions

Ball Joints and Parts Consumption by Region

- North America

- - United States

- - Canada

- - Mexico

- Asia-Pacific

- - China

- - India

- - Japan

- - South Korea

- - Australia

- - Indonesia

- - Malaysia

- - Philippines

- - Thailand

- - Vietnam

- Europe

- - Germany

- - France

- - UK

- - Italy

- - Russia

- - Rest of Europe

- Central & South America

- - Brazil

- - Rest of South America

- Middle East & Africa

- - GCC Countries

- - Turkey

- - Egypt

- - South Africa

- - Rest of Middle East & Africa

The study objectives are:

- To analyze and research the global Ball Joints and Parts status and future forecast,involving, production, revenue, consumption, historical and forecast.

- To present the key Ball Joints and Parts manufacturers, production, revenue, market share, SWOT analysis and development plans in next few years.

- To segment the breakdown data by regions, type, manufacturers and applications.

- To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.

- To identify significant trends, drivers, influence factors in global and regions.

- To strategically analyze each submarket with respect to individual growth trend and their contribution to the market.

- To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.

In this study, the years considered to estimate the market size of Ball Joints and Parts :

- History Year: 2014 - 2018

- Base Year: 2018

- Estimated Year: 2019

- Forecast Year: 2019 - 2025

This report includes the estimation of market size for value (million USD) and volume (K Units). Both top-down and bottom-up approaches have been used to estimate and validate the market size of Ball Joints and Parts market, to estimate the size of various other dependent submarkets in the overall market. Key players in the market have been identified through secondary research, and their market shares have been determined through primary and secondary research. All percentage shares, splits, and breakdowns have been determined using secondary sources and verified primary sources.

For the data information by region, company, type and application, 2018 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.

Global Ball Joints and Parts Market Insights, Forecast to 2025

Table of Contents
1 Study Coverage
1.1 Ball Joints and Parts Product
1.2 Key Market Segments in This Study
1.3 Key Manufacturers Covered
1.4 Market by Type
1.4.1 Global Ball Joints and Parts Market Size Growth Rate by Type
1.4.2 Ball Stud
1.4.3 End Cover
1.4.4 Bearings
1.4.5 Belleville Washer
1.4.6 Housing
1.5 Market by Application
1.5.1 Global Ball Joints and Parts Market Size Growth Rate by Application
1.5.2 Passenger Cars
1.5.3 Commercial Vehicles
1.6 Study Objectives
1.7 Years Considered
2 Executive Summary
2.1 Global Ball Joints and Parts Market Size
2.1.1 Global Ball Joints and Parts Revenue 2014-2025
2.1.2 Global Ball Joints and Parts Production 2014-2025
2.2 Ball Joints and Parts Growth Rate (CAGR) 2019-2025
2.3 Analysis of Competitive Landscape
2.3.1 Manufacturers Market Concentration Ratio (CR5 and HHI)
2.3.2 Key Ball Joints and Parts Manufacturers
2.3.2.1 Ball Joints and Parts Manufacturing Base Distribution, Headquarters
2.3.2.2 Manufacturers Ball Joints and Parts Product Offered
2.3.2.3 Date of Manufacturers Enter into Ball Joints and Parts Market
2.4 Key Trends for Ball Joints and Parts Markets & Products
3 Market Size by Manufacturers
3.1 Ball Joints and Parts Production by Manufacturers
3.1.1 Ball Joints and Parts Production by Manufacturers
3.1.2 Ball Joints and Parts Production Market Share by Manufacturers
3.2 Ball Joints and Parts Revenue by Manufacturers
3.2.1 Ball Joints and Parts Revenue by Manufacturers (2014-2019)
3.2.2 Ball Joints and Parts Revenue Share by Manufacturers (2014-2019)
3.3 Ball Joints and Parts Price by Manufacturers
3.4 Mergers & Acquisitions, Expansion Plans
4 Ball Joints and Parts Production by Regions
4.1 Global Ball Joints and Parts Production by Regions
4.1.1 Global Ball Joints and Parts Production Market Share by Regions
4.1.2 Global Ball Joints and Parts Revenue Market Share by Regions
4.2 United States
4.2.1 United States Ball Joints and Parts Production
4.2.2 United States Ball Joints and Parts Revenue
4.2.3 Key Players in United States
4.2.4 United States Ball Joints and Parts Import & Export
4.3 Europe
4.3.1 Europe Ball Joints and Parts Production
4.3.2 Europe Ball Joints and Parts Revenue
4.3.3 Key Players in Europe
4.3.4 Europe Ball Joints and Parts Import & Export
4.4 China
4.4.1 China Ball Joints and Parts Production
4.4.2 China Ball Joints and Parts Revenue
4.4.3 Key Players in China
4.4.4 China Ball Joints and Parts Import & Export
4.5 Japan
4.5.1 Japan Ball Joints and Parts Production
4.5.2 Japan Ball Joints and Parts Revenue
4.5.3 Key Players in Japan
4.5.4 Japan Ball Joints and Parts Import & Export
4.6 South Korea
4.6.1 South Korea Ball Joints and Parts Production
4.6.2 South Korea Ball Joints and Parts Revenue
4.6.3 Key Players in South Korea
4.6.4 South Korea Ball Joints and Parts Import & Export
4.7 India
4.7.1 India Ball Joints and Parts Production
4.7.2 India Ball Joints and Parts Revenue
4.7.3 Key Players in India
4.7.4 India Ball Joints and Parts Import & Export
4.8 Other Regions
5 Ball Joints and Parts Consumption by Regions
5.1 Global Ball Joints and Parts Consumption by Regions
5.1.1 Global Ball Joints and Parts Consumption by Regions
5.1.2 Global Ball Joints and Parts Consumption Market Share by Regions
5.2 North America
5.2.1 North America Ball Joints and Parts Consumption by Application
5.2.2 North America Ball Joints and Parts Consumption by Countries
5.2.3 United States
5.2.4 Canada
5.2.5 Mexico
5.3 Europe
5.3.1 Europe Ball Joints and Parts Consumption by Application
5.3.2 Europe Ball Joints and Parts Consumption by Countries
5.3.3 Germany
5.3.4 France
5.3.5 UK
5.3.6 Italy
5.3.7 Russia
5.4 Asia Pacific
5.4.1 Asia Pacific Ball Joints and Parts Consumption by Application
5.4.2 Asia Pacific Ball Joints and Parts Consumption by Countries
5.4.3 China
5.4.4 Japan
5.4.5 South Korea
5.4.6 India
5.4.7 Australia
5.4.8 Indonesia
5.4.9 Thailand
5.4.10 Malaysia
5.4.11 Philippines
5.4.12 Vietnam
5.5 Central & South America
5.5.1 Central & South America Ball Joints and Parts Consumption by Application
5.5.2 Central & South America Ball Joints and Parts Consumption by Country
5.5.3 Brazil
5.6 Middle East and Africa
5.6.1 Middle East and Africa Ball Joints and Parts Consumption by Application
5.6.2 Middle East and Africa Ball Joints and Parts Consumption by Countries
5.6.3 GCC Countries
5.6.4 Egypt
5.6.5 South Africa
6 Market Size by Type
6.1 Global Ball Joints and Parts Production by Type
6.2 Global Ball Joints and Parts Revenue by Type
6.3 Ball Joints and Parts Price by Type
7 Market Size by Application
7.1 Overview
7.2 Global Ball Joints and Parts Breakdown Dada by Application
7.2.1 Global Ball Joints and Parts Consumption by Application
7.2.2 Global Ball Joints and Parts Consumption Market Share by Application (2014-2019)
8 Key Industry Players
8.1 Johnson Controls Incorporated
8.1.1 Johnson Controls Incorporated Company Details
8.1.2 Production and Revenue of Ball Joints and Parts
8.1.3 Johnson Controls Incorporated Ball Joints and Parts Product Description
8.1.4 SWOT Analysis
8.1.5 Johnson Controls Incorporated Economic Activity & Plans
8.2 Honeywell International Incorporated
8.2.1 Honeywell International Incorporated Company Details
8.2.2 Production and Revenue of Ball Joints and Parts
8.2.3 Honeywell International Incorporated Ball Joints and Parts Product Description
8.2.4 SWOT Analysis
8.2.5 Honeywell International Incorporated Economic Activity & Plans
8.3 Goodyear Tire & Rubber Company
8.3.1 Goodyear Tire & Rubber Company Company Details
8.3.2 Production and Revenue of Ball Joints and Parts
8.3.3 Goodyear Tire & Rubber Company Ball Joints and Parts Product Description
8.3.4 SWOT Analysis
8.3.5 Goodyear Tire & Rubber Company Economic Activity & Plans
8.4 General Motors Company
8.4.1 General Motors Company Company Details
8.4.2 Production and Revenue of Ball Joints and Parts
8.4.3 General Motors Company Ball Joints and Parts Product Description
8.4.4 SWOT Analysis
8.4.5 General Motors Company Economic Activity & Plans
8.5 Ford Motor Company
8.5.1 Ford Motor Company Company Details
8.5.2 Production and Revenue of Ball Joints and Parts
8.5.3 Ford Motor Company Ball Joints and Parts Product Description
8.5.4 SWOT Analysis
8.5.5 Ford Motor Company Economic Activity & Plans
8.6 LANBI
8.6.1 LANBI Company Details
8.6.2 Production and Revenue of Ball Joints and Parts
8.6.3 LANBI Ball Joints and Parts Product Description
8.6.4 SWOT Analysis
8.6.5 LANBI Economic Activity & Plans
8.7 CCTY Bearing Company
8.7.1 CCTY Bearing Company Company Details
8.7.2 Production and Revenue of Ball Joints and Parts
8.7.3 CCTY Bearing Company Ball Joints and Parts Product Description
8.7.4 SWOT Analysis
8.7.5 CCTY Bearing Company Economic Activity & Plans
8.8 Pailton Engineering
8.8.1 Pailton Engineering Company Details
8.8.2 Production and Revenue of Ball Joints and Parts
8.8.3 Pailton Engineering Ball Joints and Parts Product Description
8.8.4 SWOT Analysis
8.8.5 Pailton Engineering Economic Activity & Plans
8.9 ZF TRW
8.9.1 ZF TRW Company Details
8.9.2 Production and Revenue of Ball Joints and Parts
8.9.3 ZF TRW Ball Joints and Parts Product Description
8.9.4 SWOT Analysis
8.9.5 ZF TRW Economic Activity & Plans
9 Entry Strategy for Key Countries
9.1 Entry Strategy for United States Market
9.2 Entry Strategy for China Market
9.3 Entry Strategy for India Market
10 Production Forecasts
10.1 Ball Joints and Parts Production and Revenue Forecast
10.1.1 Global Ball Joints and Parts Production Forecast 2019-2025
10.1.2 Global Ball Joints and Parts Revenue Forecast 2019-2025
10.2 Ball Joints and Parts Production and Revenue Forecast by Regions
10.2.1 Global Ball Joints and Parts Revenue Forecast by Regions
10.2.2 Global Ball Joints and Parts Production Forecast by Regions
10.3 Ball Joints and Parts Key Producers Forecast
10.3.1 United States
10.3.2 Europe
10.3.3 China
10.3.4 Japan
10.3.5 South Korea
10.3.6 India
10.4 Forecast by Type
10.4.1 Global Ball Joints and Parts Production Forecast by Type
10.4.2 Global Ball Joints and Parts Revenue Forecast by Type
11 Consumption Forecast
11.1 Ball Joints and Parts Consumption Forecast by Application
11.2 Ball Joints and Parts Consumption Forecast by Regions
11.3 North America Market Consumption Forecast
11.3.1 North America Ball Joints and Parts Consumption Forecast by Regions 2019-2025
11.3.2 United States
11.3.3 Canada
11.3.4 Mexico
11.4 Europe Market Consumption Forecast
11.4.1 Europe Ball Joints and Parts Consumption Forecast by Regions 2019-2025
11.4.2 Germany
11.4.3 France
11.4.4 UK
11.4.5 Italy
11.4.6 Russia
11.5 Asia Pacific Market Consumption Forecast
11.5.1 Asia Pacific Ball Joints and Parts Consumption Forecast by Regions 2019-2025
11.5.2 China
11.5.3 Japan
11.5.4 South Korea
11.5.5 India
11.5.6 Australia
11.5.7 Indonesia
11.5.8 Thailand
11.5.9 Malaysia
11.5.10 Philippines
11.5.11 Vietnam
11.6 Central & South America Market Consumption Forecast
11.6.1 Central & South America Ball Joints and Parts Consumption Forecast by Regions 2019-2025
11.6.2 Brazil
11.7 Middle East and Africa Market Consumption Forecast
11.7.1 Middle East and Africa Ball Joints and Parts Consumption Forecast by Regions 2019-2025
11.7.2 GCC Countries
11.7.3 Egypt
11.7.4 South Africa
12 Opportunities & Challenges, Threat and Affecting Factors
12.1 Market Opportunities
12.2 Market Challenges
12.3 Porter's Five Forces Analysis
13 Key Findings in the Global Ball Joints and Parts Study
14 Appendix
14.1 Research Methodology
14.1.1 Methodology/Research Approach
14.1.1.1 Research Programs/Design
14.1.1.2 Market Size Estimation
14.1.1.3 Market Breakdown and Data Triangulation
14.1.2 Data Source
14.1.2.1 Secondary Sources
14.1.2.2 Primary Sources
14.2 Author Details
14.3 Disclaimer
List of Tables and Figures
Figure Ball Joints and Parts Product Picture
Table Ball Joints and Parts Key Market Segments in This Study
Table Key Manufacturers Ball Joints and Parts Covered in This Study
Table Major Manufacturers Ball Joints and Parts Sales to top 10 OEMs in 2018 (Supply Relationship)
Table Global Ball Joints and Parts Market Size Growth Rate by Type 2019-2025 (K Units) & (Million US$)
Figure Global Ball Joints and Parts Production Market Share 2014-2025
Figure Ball Stud Product Picture
Table Major Manufacturers of Ball Stud
Figure End Cover Product Picture
Table Major Manufacturers of End Cover
Figure Bearings Product Picture
Table Major Manufacturers of Bearings
Figure Belleville Washer Product Picture
Table Major Manufacturers of Belleville Washer
Figure Housing Product Picture
Table Major Manufacturers of Housing
Table Global Ball Joints and Parts Market Size Growth Rate by Application 2019-2025 (K Units)
Figure Passenger Cars
Figure Commercial Vehicles
Figure Ball Joints and Parts Report Years Considered
Figure Global Ball Joints and Parts Revenue 2014-2025 (Million US$)
Figure Global Ball Joints and Parts Production 2014-2025 (K Units)
Table Global Ball Joints and Parts Market Size Growth Rate by Regions 2019-2025(K Units) & (Million US$)
Table Global Manufacturers Market Concentration Ratio (CR5 and HHI)
Table Ball Joints and Parts Manufacturing Base Distribution and Headquarters
Table Manufacturers Ball Joints and Parts Product Offered
Table Date of Manufacturers Enter into Ball Joints and Parts Market
Table Global Ball Joints and Parts Production by Manufacturers (2014-2019) (K Units)
Table Global Ball Joints and Parts Production Share by Manufacturers (2014-2019)
Figure Global Ball Joints and Parts Production Share by Manufacturers in 2018
Table Ball Joints and Parts Revenue by Manufacturers (2014-2019) (Million US$)
Figure Ball Joints and Parts Value Share by Manufacturers in 2019
Table Ball Joints and Parts Revenue Share by Manufacturers (2014-2019)
Table Ball Joints and Parts Price by Manufacturers 2014-2019 (USD/Unit)
Table Mergers & Acquisitions, Expansion Plans
Table Global Ball Joints and Parts Production by Regions 2014-2019 (K Units)
Table Global Ball Joints and Parts Production Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Production Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Production Market Share by Regions in 2018
Table Global Ball Joints and Parts Revenue by Regions 2014-2019 (Million US$)
Table Global Ball Joints and Parts Revenue Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Revenue Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Revenue Market Share by Regions in 2018
Figure United States Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure United States Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table United States Ball Joints and Parts Import & Export
Figure Europe Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure Europe Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table Europe Ball Joints and Parts Import & Export
Figure China Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure China Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table China Ball Joints and Parts Import & Export
Figure Japan Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure Japan Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table Japan Ball Joints and Parts Import & Export
Figure South Korea Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure South Korea Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table South Korea Ball Joints and Parts Import & Export
Figure India Ball Joints and Parts Production and Growth Rate 2014-2019 (K Units)
Figure India Ball Joints and Parts Revenue and Growth Rate 2014-2019 (Million US$)
Table India Ball Joints and Parts Import & Export
Table Global Ball Joints and Parts Consumption by Regions 2014-2019 (K Units)
Table Global Ball Joints and Parts Consumption Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Consumption Market Share by Regions 2014-2019
Figure Global Ball Joints and Parts Consumption Market Share by Regions in 2018
Figure North America Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Table North America Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Figure 2018 North America Ball Joints and Parts Consumption Market Share by Application
Table North America Ball Joints and Parts Consumption by Countries (2014-2019) (K Units)
Figure 2018 North America Ball Joints and Parts Consumption Market Share by Countries
Figure United States Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Canada Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Mexico Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Europe Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Table Europe Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Figure 2018 Europe Ball Joints and Parts Consumption Market Share by Application
Table Europe Ball Joints and Parts Consumption by Countries (2014-2019) (K Units)
Figure 2018 Europe Ball Joints and Parts Consumption Market Share by Countries
Figure Germany Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure France Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure UK Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Italy Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Russia Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Asia Pacific Ball Joints and Parts Consumption and Growth Rate (K Units)
Table Asia Pacific Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Table Asia Pacific Ball Joints and Parts Consumption Market Share by Application (2014-2019) (K Units)
Table Asia Pacific Ball Joints and Parts Consumption by Countries (2014-2019) (K Units)
Table Asia Pacific Ball Joints and Parts Consumption Market Share by Countries (2014-2019) (K Units)
Figure China Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Japan Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Korea Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure India Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Australia Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Indonesia Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Thailand Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Malaysia Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Philippines Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Vietnam Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Central & South America Ball Joints and Parts Consumption and Growth Rate (K Units)
Table Central & South America Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Figure 2018 Central & South America Ball Joints and Parts Consumption Market Share by Application
Table Central & South America Ball Joints and Parts Consumption by Countries (2014-2019) (K Units)
Figure Central & South America Ball Joints and Parts Consumption Market Share by Countries
Figure Brazil Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Middle East and Africa Ball Joints and Parts Consumption and Growth Rate (K Units)
Table Middle East and Africa Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Figure 2018 Middle East and Africa Ball Joints and Parts Consumption Market Share by Application
Table Middle East and Africa Ball Joints and Parts Consumption by Countries (2014-2019) (K Units)
Figure Middle East and Africa Ball Joints and Parts Consumption Market Share by Countries
Figure GCC Countries Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure Egypt Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Figure South Africa Ball Joints and Parts Consumption and Growth Rate (2014-2019) (K Units)
Table Global Ball Joints and Parts Production by Type (2014-2019) (K Units)
Table Global Ball Joints and Parts Production Share by Type (2014-2019)
Figure Global Ball Joints and Parts Production Market Share by Type (2014-2019)
Figure Global Ball Joints and Parts Production Market Share by Type in 2018
Table Global Ball Joints and Parts Revenue by Type (2014-2019) (Million US$)
Table Global Ball Joints and Parts Revenue Share by Type (2014-2019)
Figure Global Ball Joints and Parts Revenue Market Share by Type (2014-2019)
Figure Global Ball Joints and Parts Revenue Market Share by Type in 2018
Table Ball Joints and Parts Price by Type 2014-2019 (USD/Unit)
Table Global Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Table Global Ball Joints and Parts Consumption by Application (2014-2019) (K Units)
Table Global Ball Joints and Parts Consumption Share by Application (2014-2019)
Figure Global Ball Joints and Parts Consumption Market Share by Application (2014-2019)
Figure Global Ball Joints and Parts Value (Consumption) Market Share by Application (2014-2019)
Table Johnson Controls Incorporated Company Details
Table Johnson Controls Incorporated Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure Johnson Controls Incorporated Ball Joints and Parts Production Growth Rate (2014-2019)
Figure Johnson Controls Incorporated Ball Joints and Parts Production Market Share in Global Market
Figure Johnson Controls Incorporated SWOT Analysis
Table Honeywell International Incorporated Company Details
Table Honeywell International Incorporated Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure Honeywell International Incorporated Ball Joints and Parts Production Growth Rate (2014-2019)
Figure Honeywell International Incorporated Ball Joints and Parts Production Market Share in Global Market
Figure Honeywell International Incorporated SWOT Analysis
Table Goodyear Tire & Rubber Company Company Details
Table Goodyear Tire & Rubber Company Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure Goodyear Tire & Rubber Company Ball Joints and Parts Production Growth Rate (2014-2019)
Figure Goodyear Tire & Rubber Company Ball Joints and Parts Production Market Share in Global Market
Figure Goodyear Tire & Rubber Company SWOT Analysis
Table General Motors Company Company Details
Table General Motors Company Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure General Motors Company Ball Joints and Parts Production Growth Rate (2014-2019)
Figure General Motors Company Ball Joints and Parts Production Market Share in Global Market
Figure General Motors Company SWOT Analysis
Table Ford Motor Company Company Details
Table Ford Motor Company Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure Ford Motor Company Ball Joints and Parts Production Growth Rate (2014-2019)
Figure Ford Motor Company Ball Joints and Parts Production Market Share in Global Market
Figure Ford Motor Company SWOT Analysis
Table LANBI Company Details
Table LANBI Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure LANBI Ball Joints and Parts Production Growth Rate (2014-2019)
Figure LANBI Ball Joints and Parts Production Market Share in Global Market
Figure LANBI SWOT Analysis
Table CCTY Bearing Company Company Details
Table CCTY Bearing Company Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure CCTY Bearing Company Ball Joints and Parts Production Growth Rate (2014-2019)
Figure CCTY Bearing Company Ball Joints and Parts Production Market Share in Global Market
Figure CCTY Bearing Company SWOT Analysis
Table Pailton Engineering Company Details
Table Pailton Engineering Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure Pailton Engineering Ball Joints and Parts Production Growth Rate (2014-2019)
Figure Pailton Engineering Ball Joints and Parts Production Market Share in Global Market
Figure Pailton Engineering SWOT Analysis
Table ZF TRW Company Details
Table ZF TRW Ball Joints and Parts Production (K Units), Revenue (Million US$), Price (USD/Unit) and Gross Margin (2014-2019)
Figure ZF TRW Ball Joints and Parts Production Growth Rate (2014-2019)
Figure ZF TRW Ball Joints and Parts Production Market Share in Global Market
Figure ZF TRW SWOT Analysis
Table Entry Strategy for United States Market
Table Entry Strategy for China Market
Table Entry Strategy for India Market
Figure Global Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure Global Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Table Global Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Table Global Ball Joints and Parts Revenue Forecast by Regions 2019-2025 (Million US$)
Figure Global Ball Joints and Parts Revenue Forecast by Regions 2019-2025 (Million US$)
Figure Global Ball Joints and Parts Revenue Market Share Forecast by Regions 2019-2025
Table Global Ball Joints and Parts Production Forecast by Regions 2019-2025 (K Units)
Figure Global Ball Joints and Parts Production Forecast by Regions 2019-2025 (K Units)
Figure Global Ball Joints and Parts Production Market Share Forecast by Regions 2019-2025
Figure United States Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure United States Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Figure Europe Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure Europe Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Figure China Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure China Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Figure Japan Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure Japan Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Figure South Korea Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure South Korea Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Figure India Ball Joints and Parts Production Forecast 2019-2025 (K Units)
Figure India Ball Joints and Parts Revenue Forecast 2019-2025 (Million US$)
Table Global Ball Joints and Parts Production Forecast by Type 2019-2025 (K Units)
Figure Global Ball Joints and Parts Production Forecast by Type 2019-2025 (K Units)
Figure Global Ball Joints and Parts Production Market Share Forecast by Type 2019-2025
Table Global Ball Joints and Parts Revenue Forecast by Type 2019-2025 (Million US$)
Figure Global Ball Joints and Parts Revenue Forecast by Type 2019-2025 (Million US$)
Figure Global Ball Joints and Parts Revenue Market Share Forecast by Type 2019-2025
Table Global Ball Joints and Parts Consumption Forecast by Application 2019-2025 (K Units)
Figure Global Ball Joints and Parts Consumption Forecast by Application 2019-2025 (K Units)
Figure Global Ball Joints and Parts Consumption Market Share Forecast by Application 2019-2025
Table Global Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure Global Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure Global Ball Joints and Parts Consumption Market Share Forecast by Regions 2019-2025
Table North America Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure United States Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Canada Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure MexicoBall Joints and Parts Consumption Forecast 2019-2025 (K Units)
Table Europe Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure Germany Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure France Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure UK Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Italy Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Russia Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Table Asia Pacific Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure China Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Japan Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Korea Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure India Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Australia Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Indonesia Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Thailand Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Malaysia Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Philippines Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Vietnam Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Table Central & South America Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure Brazil Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Table Middle East and Africa Ball Joints and Parts Consumption Forecast by Regions 2019-2025 (K Units)
Figure Middle East and Africa Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure GCC Countries Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure Egypt Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Figure South Africa Ball Joints and Parts Consumption Forecast 2019-2025 (K Units)
Table Porter's Five Forces Analysis
Table Research Programs/Design for This Report
Figure Bottom-up and Top-down Approaches for This Report
Figure Data Triangulation
Table Key Data Information from Secondary Sources
Table Key Data Information from Primary Sources
  • Global Automotive 4D Imaging Radar Market Research Report 2024
    Published: 11-Jan-2024        Price: US 2900 Onwards        Pages: 141
    The global Automotive 4D Imaging Radar market was valued at US$ 116.13 million in 2023 and is anticipated to reach US$ 7,017.98 million by 2030, witnessing a CAGR of 75.08% during the forecast period 2024-2030. China market for Automotive 4D Imaging Radar is estimated to increase from $ 112.5 million in 2023 to reach $ 17,235.23 million by 2030, at a CAGR of 100.3% during the forecast period of 2024 through 2030. The major global manufacturers of Automotive 4D Imaging Radar include......
  • Global Automotive Rader Sensors Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 116
    The global Automotive Rader Sensors market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. Automotive is a key driver of this industry. According to data from The World Automobile Organization (OICA), global automobile production and sales in 2017 reached their peak in The past 10 years, at 97.3 million and 95.89 million respectively. In 2018, The global economic expansion ended, and The ......
  • Global Side Door Latches Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 101
    The global Side Door Latches market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. North American market for Side Door Latches is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Side Door Latches is estimated to increase from $ million in 2023 to reach $ million by 2030......
  • Global Tubeless Tires Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 116
    The global Tubeless Tires market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. In 2022, global tire sales reached 1.749 billion units, of which The three major markets of Europe, North America and China will collectively sell 1.14 billion units, accounting for 65% of The total. China is The world's largest tire producer and exporter. Among The top 75 tire companies in 2022 released by T......
  • Global Motorcycle Lighting Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 120
    The global Motorcycle Lighting market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. North American market for Motorcycle Lighting is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Motorcycle Lighting is estimated to increase from $ million in 2023 to reach $ million b......
  • Global Wireless Car Charging Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 87
    The global Wireless Car Charging market was valued at US$ 2401 million in 2023 and is anticipated to reach US$ 10350 million by 2030, witnessing a CAGR of 22.7% during The forecast period 2024-2030. North American market for Wireless Car Charging is estimated to increase from $ million in 2023 to reach $ million by 2030, at a CAGR of % during The forecast period of 2024 through 2030. Asia-Pacific market for Wireless Car Charging is estimated to increase from $ million in 2023......
  • Global Fixed-route Autonomous Vehicle Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 87
    The global Fixed-route Autonomous Vehicle market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. Automotive is a key driver of this industry. According to data from The World Automobile Organization (OICA), global automobile production and sales in 2017 reached their peak in The past 10 years, at 97.3 million and 95.89 million respectively. In 2018, The global economic expansion ended, an......
  • Global Eco Friendly Tyre Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 95
    The global Eco Friendly Tyre market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing a CAGR of % during The forecast period 2024-2030. In 2022, global tire sales reached 1.749 billion units, of which The three major markets of Europe, North America and China will collectively sell 1.14 billion units, accounting for 65% of The total. China is The world's largest tire producer and exporter. Among The top 75 tire companies in 2022 released b......
  • Global Radial Tire Mold Market Research Report 2024
    Published: 10-Jan-2024        Price: US 2900 Onwards        Pages: 101
    This report studies Radial Tire Mold. Tire molds are used in The vulcanization molding of all kinds of tires. Usually, The tire molds can be classified in to segmented molds and two-piece molds. The global Radial Tire Mold market was valued at US$ 1522 million in 2023 and is anticipated to reach US$ 1671.9 million by 2030, witnessing a CAGR of 1.5% during The forecast period 2024-2030. In 2022, global tire sales reached 1.749 billion units, of which The three major markets of......
  • SERVICES
    Value for Money
    We believe in "optimum utilization of available budget and resources". While servicing our clients' (your) market research requirements, we keep the same approach in focus to help you get the best value for your $$s.
    Ever Growing Inventory
    Ranging from the smallest feasible / required data (datasheets, data facts, SWOT analysis, company profiles, etc) to full research reports that help you make decisions, our inventory is updated almost on a daily basis with the latest industry reports from domain experts that track more than 5000 niche sectors.
    One Stop Solution
    Need a custom research report on medical devices market? Require all available business intelligence on 3D printing industry? Exploring F&B sector of a particular country/region? RnRMarketResearch.com is your one-stop-solution to all market intelligence needs. We not only offer custom research and consulting services, we also "bundle" reports to meet your needs and help you fetch the data analysis you require for your business.
    Dedicated Client Engagement
    Not limited to only "finding" relevant reports for you, our client engagement team dedicates its efforts to understand your "business need" and accordingly maps available research data to help you move forward. Call "your" client engagement executive any time of your day and get your questions answered in order to make the correct business decision.
    Saving Time and Efforts
    Simply share your research requirement details with us and let us do all the hard work to find required intelligence for you. When you add up our "one stop solution" and "dedicated client engagement" services mentioned above, you obviously know the time and effort saving you do by working with us.
    Payment Flexibility
    Working with Fortune 500 organizations, we understand the importance of being flexible for payments. Share your payment terms with us and we will surely match up to them to ensure you get access to required business intelligence data without having to wait for the payment to be done.
    Post-Purchase Research Support
    Have questions after reading a report / datasheet bought through us? Not sure about the methodology used for data available in the research? Talk to us / Share your questions with us and if required, we will connect you with the analyst(s)/author(s) of the report(s) and ensure you get satisfactory answers for the same. Need more data / analysis / report(s) on the topic of your research/project? The RnRMarketResearch.com team is here for you 24X7 to support you with your post-purchase requirements. Subscription Offers & Packages (Get in touch with us for more details - [email protected] / +1 888 391 5441 )
    • Ad Hoc
    • Pay - as - you - go / Bucket Subscriptions
    • Fixed Cost for #of reports
    • Customize / Personalize as per your needs